This item is best described as a black, white, silver and gold iridescent lines on acrylic. This is one of the coolest sheets for jewelry making, I just do not like how it finishes on the edges. A machine that has air assist may work better for cutting these without a small little melted edge or different settings. This item is sold as is scratch and dent and some of the plastic sheets have us questioning the acrylic sheet underneath too. Our loss is your gain!
Material: Acrylic/PMMA
Type: Cast Poured Acrylic
Size: ~12x20 (+/-1.0mm in length and width)
Thickness: 3mm (+/-0.1mm in thickness)
Surface Finish: Both sides are glossy and relatively uniform
Masking: Clear Plastic PE Films on Both Sides for Shipping Protection Only (remove to use)
GF Cut Settings: Black Medium Proofgrade Acrylic
Cut Settings are only a recommendation; please test your sheet on whatever machine you are using, because every laser, regardless of brand, will cut differently. The settings are just a recommendation of what worked best for us.
Laser tip: To avoid excess melting or burning, round the corners in your design so the laser does not remain in one location for long.
All of these sheets are custom made, so no two sheets will be alike.
Related Products
