Material: Acrylic/PMMA
Type: Film Applied to Cast Acrylic
Size: 12"x18" (+/-1.0mm in length and width)
Thickness: 3mm (+/-0.1mm in thickness)
Surface Finish: Both sides are glossy
Masking: Blue Plastic PE Films on one side and clear on the other (remove to use so it does not melt to the plastic sheet and paper masking can be used over the top without issue but be careful removing it so it doesn't damage the transparent film)
GF Cut Settings: Clear Medium Proofgrade Acrylic
Cut Settings are only a recommendation; please test your sheet on whatever machine you are using, because every laser, regardless of brand, will cut differently. The settings are just a recommendation of what worked best for us.
Laser tip: To avoid excess melting or burning, round the corners in your design so the laser does not remain in one location for long.
NOTE: This sheet does have a strong smell like an extruded or a mirror sheet so if you have an issue with smell, please make sure you have good ventilation when cutting this type of product.
Related Products
