Iridescent Prism - 1/8" Acrylic Sheet – Little Sweet Pea Designs
New

Iridescent Prism - 1/8" Acrylic Sheet

$4.00

Sample (3"x3")
Full Sheet
Spend $99.00 to Free Shipping
PRODUCT INFORMATION
PRODUCT INFORMATION
This iridescent sheet contains a rainbow of lines and colors that changes with motion. The unique film shimmers in the light, and cuts beautifully when laser engraved. The sheet is transparent, and easily seen through. Please be careful peeling the masking to avoid removal of the iridescent film.  

 

Material: Acrylic/PMMA

Type: Film Applied to Cast Acrylic

Size: ~varies (+/-1.0mm in length and width)

Thickness: 3mm (+/-0.1mm in thickness)

Surface Finish: Both sides are glossy 

Masking: Blue Plastic PE Films on one side and clear on the other (remove to use so it does not melt to the plastic sheet and paper masking can be used over the top without issue.  Be careful removing it so it doesn't damage the transparent film, or you will be left with a clear sheet and not holographic properties)

GF Cut Settings: 148/full Proofgrade Acrylic and cut with the film layer down to avoid flashback and melting. Also elevate the sheet off the bed a little bit.  We also suggest you cut a test piece on this.  

Cut Settings are only a recommendation; please test your sheet on whatever machine you are using, because every laser, regardless of brand, will cut differently. The settings are just a recommendation of what worked best for us. 

Laser tip: To avoid excess melting or burning, round the corners in your design so the laser does not remain in one location for long.